Welcome to the Culver Aircraft Forum

Culver Cadet Section => Modifications => Topic started by: Neal LaFrance on February 14, 2012, 11:19:58 AM

Title: Prevent Tail wheel shake.
Post by: Neal LaFrance on February 14, 2012, 11:19:58 AM
Hi Cadet pilots. Aligment of the tail wheel is important to prevent exssive loads to the fuselage tail wheel mount. One of the  most important points is to make sure the pivot angle is vertical with the ground when the airplane is loaded. Changeing this angle effects the caster of the tail wheel, which may cause ossliation and extensive loads on the stearing cables. Neal