Author Topic: Wood seat back  (Read 3856 times)

Dan Rhinehart

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
  • N Number: NC41620
Wood seat back
« on: June 26, 2012, 05:24:41 PM »
Hi all,

Does anyone out there have a picture or general measurements for the wood seat back? (not the seat cushions)
Is this just a piece of plywood? How thick? How tall? What if any braces etc...???

Woody

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
Re: Wood seat back
« Reply #1 on: June 26, 2012, 08:19:48 PM »
Dan.
 I have a seat back without the cover.  Will get the dimensions and post here later today
Frame is 341/2" long by 173/4" high with a center brace in it.  Frame is 7/8" deep by 5/8" wide stock with 16 1/2" long center brace.  Bottom of frame is cut at 45 degree angle at the corners. 1/8" Luna for the skin. All corners are blocked with 45 degree blocks.  Three hinges at bottom.
« Last Edit: June 26, 2012, 08:58:47 PM by Woody »