Author Topic: Changes or add on's to the Franklin 90hp engine  (Read 26294 times)

Woody

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
Changes or add on's to the Franklin 90hp engine
« on: February 06, 2013, 12:38:36 PM »
Scuttlebutt is there is a lightweight starter from Sky tech (now defunct) that will fit the Franklin 90.  Southern Aero (Robert Still) knows about them and where one might purchase.  Several pounds can be saved with the change over.  Also there is a conversion to change the heavy Eisemamn mags out.  That plus an alternator should shave 15 or more pounds off the engine.  Check it out.   ::)

Culver Dreamer

  • *
  • Posts: 43
    • View Profile
Re: Changes or add on's to the Franklin 90hp engine
« Reply #1 on: February 08, 2013, 10:36:37 AM »
 Hay Woody: I havn't seen any new pictures on your web site in a long time how about an update. Have you bought these weight saving items for your engine?
Mark

Brett Lovett

  • Jr. Member
  • **
  • Posts: 92
    • View Profile
Re: Changes or add on's to the Franklin 90hp engine
« Reply #2 on: February 09, 2013, 11:42:12 PM »
Sky-Tec is defunct?  I don't believe that is so.

Woody

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
Re: Changes or add on's to the Franklin 90hp engine
« Reply #3 on: February 10, 2013, 07:38:28 PM »
The word was scuttlebutt -- That's what Southern Aero told me and I know the man that bought up their supplies.  That's all I know as I too did not believe it at first.

Woody

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
Re: Changes or add on's to the Franklin 90hp engine
« Reply #4 on: February 10, 2013, 07:43:15 PM »
 I'm working on another plane right now.  If everyone will pitch in $1000 I'll post more pictures on my site. (ha)
I need to upgrade the entire web site and I do have a few new pictures including a rebuilt Franklin.   Yes -- If possible, I plan on making the engine as light as possible.

Woody

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
Re: Changes or add on's to the Franklin 90hp engine
« Reply #5 on: February 11, 2013, 01:24:24 PM »
Update ~~~ Air tech is still in business:  I just talked with them so my info was wrong.  :-\
Maybe the guy did buy out the remaining stock that Sky Tech still had for the Franklin.  I will try to find out.  I think that is the case.  Sky Tech quit making the starter for the Franklin.  The man in Ga. bought  the remaining stock of THAT starter.  Maybe my story is now straight.
« Last Edit: February 11, 2013, 06:25:03 PM by Woody »

Bill Poynter

  • Administrator
  • Full Member
  • *****
  • Posts: 231
    • View Profile
  • N Number: N41637
Re: Changes or add on's to the Franklin 90hp engine
« Reply #6 on: February 13, 2013, 10:16:14 AM »
Before purchasing a lightweight starter or an alternator for a Franklin engine, make sure you can get it blessed by the FAA.  It's possible that the only approved data for the installations are for the 6 cylinder Franklins.
« Last Edit: February 13, 2013, 12:48:27 PM by Bill Poynter »

Bill Poynter

  • Administrator
  • Full Member
  • *****
  • Posts: 231
    • View Profile
  • N Number: N41637
Re: Changes or add on's to the Franklin 90hp engine
« Reply #7 on: July 26, 2016, 10:19:00 AM »
Does anyone know of an FAA approval for the installation of Slick mags on a Franklin 4AC199-E3?

I'm also looking for the correct Marvel Scheibler carburetor for the Franklin 4AC199E3 engine.  I think it's a model MA3 or MA3A, but I'm not sure of the 10-XXXX number.
« Last Edit: July 26, 2016, 04:21:26 PM by Bill Poynter »

JoeB

  • Jr. Member
  • **
  • Posts: 87
    • View Profile
    • Events Decorated
  • N Number: N34793
Re: Changes or add on's to the Franklin 90hp engine
« Reply #8 on: July 27, 2016, 12:31:59 AM »
Does anyone know of an FAA approval for the installation of Slick mags on a Franklin 4AC199-E3?

I'm also looking for the correct Marvel Scheibler carburetor for the Franklin 4AC199E3 engine.  I think it's a model MA3 or MA3A, but I'm not sure of the 10-XXXX number.

Hi Bill,

I remembered asking something similar on the carb a few years ago, might help?http://culvercadet.com/simplemachinesforum/index.php?topic=157.msg709#msg709


Tim Lunceford

  • *
  • Posts: 44
    • View Profile
  • N Number: 18064 41726 41722
Re: Changes or add on's to the Franklin 90hp engine
« Reply #9 on: July 29, 2016, 12:28:19 PM »
Bill,  I have a Marvel Schebler MA-3 carb.  It does not have a tag but the numbers stamped on it are 17865, 10-2153.  I can send pictures if you are interested.   Tim